Joined in 2023 
82 
63 About this deal
The average Delta E colour variance score didn’t drop below 2.5 in any colour mode and the culprit was the same corner of the colour spectrum every time. Given the HP X27qc seems to be fairly accurate elsewhere this isn’t completely damning but it’s a shame nonetheless. Information about the brightness of the screen. It is measured in candela per square metre (cd/m²). Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality. Out of the box, greyscale performance is average. The X27q ended up a bit too warm, and the gamma was too high, making some shades darker than they should be. This caused weak deltaE performance. HP X27qc QHD Gaming Monitor (32H02AA) HP X27qc QHD Gaming Monitor (32H02AA) All tech specs Display size (diagonal)
Information about whether the stand can be dismounted. Usually, this is required for wall mounting. Maximum brightness is good, at a touch under 400 nits, which is what HP advertises. Most budget monitors of this class get around this bright, which is sufficient for indoor usage in most conditions. Minimum brightness is also solid at 43 nits, great for users in darker conditions. HDMI 2.0 (with HDCP support); 1 DisplayPort™ 1.4-in (with HDCP support) (1 HDMI 2.0 (with HDCP support); 1 DisplayPort™ 1.4-in (with HDCP support)) The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
If you’re a casual gamer on a tight budget the X27qc has almost everything you need
However we were pleasantly surprised with the stand HP has included. It's not the most sturdy or high quality stand we've seen, but it does support height adjustment and even pivot adjustment, so you can use the monitor in a portrait orientation without needing a third party stand. All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. Results may vary based on quality of the original picture/photo/video and difference between the previous monitor settings compared to the HP Enhance + mode. At a fixed 120Hz, the X27q is passable, delivering similar response times to other monitors, but with a higher level of overshoot. The panel isn't quite as good as others at the top of this chart, but good enough that it's still usable at this refresh rate.
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.The modes higher than Level 2 are pretty unusable due to high levels of overshoot. While response performance does improve, overshoot gets significantly worse, especially in the Level 4 mode, and it's here you'll see massive inverse ghost trails behind moving objects. These modes are only included so HP can claim the monitor has a 1ms response time - which it can achieve, just with insane and unusable levels of overshoot. Professional video and photo editors should steer clear, then. I’d also make an effort to ward off any gamers who enjoy a lot of shooters or other reaction-based games, as the X27qc’s VA panel exhibits a large amount of ghosting.
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio. The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage. Or at least, mostly great. As I’ve already indicated, the X27qc suffers from a small accuracy problem. Across the board, this monitor struggles to accurately reproduce blue tones, dragging what might otherwise have been an acceptable set of colour accuracy results into perceptible levels of inaccuracy. The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely. Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.For response time performance, HP includes four overdrive settings with the X27q, the first of which is Level 1. This is your classic overdrive disabled setting. Response times are weak, at just 11.5ms when running the monitor at 165Hz, which causes a bit of a blur trail to appear behind moving objects. The NTSC (1953) color space is introduced in 1953 by the FCC with the appearance of color television and has a wider gamut than the sRGB.
Great Deal 
New Comment