Games Workshop - Warhammer 40,000 - Battlezone Mechanicus Ferratonic Furnace

Product Information

Using those clips on either end of a walkway lets you suspend between it two other terrain pieces. If you really want to cover more ground, combining two long walkways is an excellent choice. Sector Mechanicus. Credit: Fowler

Free actions can only be performed when another rule specifies. Each time an operative would perform a free action, the following rules apply. So, I know these jamokes up there think their method is easy, but…. they’re using multiple steps and dry brushes and highlights…. All I’m saying is that my method has about 10 less steps than either of theirs. One key step to prepare the Sector Mechanicus terrain for paint is applying some Vallejo Oxide Paste to areas that you want heavier rust and grime. Credit: 40khamslam Unique actions are actions detailed on an operative’s datacard that only they can perform, such as the Dakka Dash action found on the example datacard. This kit is designed to be compatible with other terrain pieces and fits with many previously released kits, meaning that the possibilities are almost endless. The Ferratonic Furnace set really opens up lots of doors, giving players plenty of avenues to create their own immersive battlefields. This set has multiple levels and adds elevation to your battlefield, adding even more exciting gameplay elements.The landing pad is fully compatible with other Battlezone: Fronteris terrain sets, as well as other Battlezone terrain sets, although the style may not fully match, letting you create and build the most immersive battlefields possible. The landing pad also adds an extra element of elevation to your battlefield allowing for dynamic gameplay moments and more interesting storytelling opportunities.

From here is the detail work. I use acrylic inks over the raised details on top and inside the barriers to add some visual interest and serve as the underlayer for anywhere I want hazard stripes. I then custom printed hazard stripes on decal paper and cut them to size since I’m lazy and didn’t feel like masking and airbrushing everything. They’ll go right on top of the ink and with some Micro Set will soften and conform to the part. You may need to use a knife to poke holes where the plastic overlaps a rivet hole. After the ink dries a layer of sepia wash tones things downs and blends it all in. For the mechanical bits in the pillars I applied some Dirty Down Verdigris and then applied some sepia wash to blend it in.Lastly for the House of Shadow, gang reinforcements are here in the form of the Nacht-Ghul, Psy-Gheists, and Piscean Spektor set, which comes with added Psychoteric Wyrms. *** These new Champions, Prospects, and Exotic Beasts bring crafty close combat and psychic abilities to the tabletop, as well as a fair amount of flying muscle in the form of the Piscean Spektor – which is pretty beefy for a floating brain. The Ferratonic Furnace provides a constant supply of Metal. Upgade to increase production and storage limits. (total of 10 can be built) Drybrush a dark metallic over the whole thing. I used Army Painter gunmetal, but I’m sure Citadel Leadbelcher would be fine too. Yellow traditionally needs a few layers, and these things are large. Given the slightly rusty and oily look of the metal, I didn’t want the panels to look too pristine, which they would do with just a flat coat of paint. Howdy scummers! As we prepare for the upcoming release of Necromunda: Ash Wastes, this seemed like a phenomenal time to hit up the Goonhammer contributors for their preferred methods for painting up Sector Mechanicus kits. SM seems like a solid way to “fill” up an Ash Wastes table, in a spirit similar to the terrain previewed for the next box! We just want to encourage you to paint up all the terrain you’ve been hoarding. Sector Mechanicus Terrain

When designing statues, simply using upscaled miniatures doesn’t really work. Statues depict idealised versions of the characters they represent rather than realistic ones. Celestine, therefore, has feathered angelic wings in place of the stylised ones attached to her armour. Similarly, she is robed and bare-armed, with only her upper torso reflecting the iconic sculpted armour worn by the Adepta Sororitas. Edge drybrush everything with a light silver. I used Citadel Necron Compound, but I think Vallejo Air Steel would also work well. Sector Mechanicus terrain: the end of the grungy metal stage. Credit: Charlie Brassley Next comes the base color for the walkway. I liked the light beige-ish color they used on the original mechanicus terrain shown off so I went with that as my scheme. I apply a few thin coats of Karak Stone to get the base color for the walkway I need. The Sanctum Administratus building is made of several ruined wall and floor sections, which add lots of elevation to the battlefield and creates opportunities for interesting gameplay. The Administratus building can also be used as additional lookout posts, or as a command post that grants progress towards victory, the possibilities are limited only by your imagination. The building itself is fairly tall and can create a great central piece to battle over, or can be used as an overwatch position. The Battlezone: Mechanicus - Galvanic Magnavent set is an incredibly detailed and striking piece of terrain, letting you add multiple levels and create an even more immersive battlefield.Now that you’ve got some troops, you’ll need a Battlezone for them to squabble over. That’s where the Battlezone: Mechanicus kits come in. An incredibly detailed, striking scenery set, the Galvanic Magnavent is a modular plastic kit compatible with the entire Sector Mechanicus range – detailed, configurable scenery that will help you play games on a multi-level environment! The operative would still count as performing the action for all rules purposes. For example, if it performed it during its activation, it would not be able to perform the action again during that activation. Inside, there are 26 miniatures, including two Characters (a Canoness and a Repentia Superior), two Vehicles (a Rhino and a Penitent Engine), and four squads (Arco-flagellants, Sisters Repentia, Battle Sisters, and Seraphim). This box is an impressive place to start any army or boost an existing force. That leaves us with just one step left: Weathering. This is another spot I don’t want to spend a ton of time, so I take an old flared out brush or a piece of sponge and just dapple Typhus Corrosion all over the surface to give it lots of grime spots and dirt. I’ll smudge a few as well.