3DLAC spray adhesive for perfect adhesion to the 3D printer print bed, 400 ml

Product Information

You can read all about the cookies we use, how they work and how you can adjust your preferences in our Cookie Policy. It is absolutely crucial to keep in mind that if air shipment is required, the 3DLac Stick should be purchased as it is safe and therefore viable for air shipment without restrictions. In our experience, the the first time you use 3DLAC on your build surface apply two light coats (remember to shake the bottle before spraying). Then, only some water is needed to easily clean your printing surface and your 3D printer is ready for your next printing.

A light 3DLAC mist over the surface is enough to hold completely the first layer of plastic to the base.We’ve harnessed innovation and technology to create a one-of-a-kind solution that enhances the quality and precision of your nylon prints. PLUS is a high quality anti warping adhesive that you spray to your heated print bed to help your prints stick. By accepting these services, we are able to show you videos or other media content hosted by external providers. Depending on each material, different adherences will be achieved, so we advise you to do previous tests before printing with certain technical materials. When removing the parts take special care, we recommend waiting until the temperature of the base is below 30 ° C and in case you do not remove the piece, let it cool in the refrigerator and the piece will be released only with a light touch.

This feature ensures even distribution, reduces excess adhesive, and ultimately enhances print quality, making it an ideal choice for 3D printing users.On the one hand, there is the traditional spray lacquer version that allows the product to be easily and quickly expanded; and on the other hand, the new version in liquid vaporizer that allows to concentrate more the product and avoids that it is finished sticking it in the mechanical parts of the 3D printer as it usually happens with the 3DLac in spray due to a bad use of it. Tip: Before you remove the printed parts or the print model from the plate, wait until the temperature drops below 30 °C! With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. The product should be spread in a thin and uniform layer and allowed to dry before the 3D printing process is initiated. Nylon printing presents unique challenges and opportunities, and we want to ensure you have everything needed for outstanding results.

Proper adhesion of the extruded material to the 3D printing base is a crucial factor in successful 3D prints as it helps prevent layer misplacement, warping and deformations. A light 3DLAC mist over the surface is enough to completely hold the first layer of plastic to the base. The 3DLac Stick adhesive dries quickly, lasts very long and is compatible with multiple materials and 3D printing surfaces. We started printing right back in 2014 and have tried every trick in the book when it comes to bed adhesion.

When our filament users asked what we recommend for bed adhesion, we would always suggest this product. Intel, the Intel Logo, Intel Inside, Intel Core, and Core Inside are trademarks of Intel Corporation in the U. spray is the best solution against warping by providing a great adhesion used filaments such as PLA, ABS, PETG and more materials. A simple light spray on a smooth surface is enough to ensure that the first layer of plastic remains completely fixed to the base.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove. It should always be applied on a clean and dry surface by gently pressing the applicator against the printing surface for a few seconds until the product starts flowing. Success in 3D printing often relies on having the right tools and knowledge, and this starter pack will provide just that. Its formula not only helps firmly fix the 3D printed part to the printing base but also facilitates the removal of the part at the end of the 3D printing process.

Our unique formula is designed to deliver outstanding results, ensuring your creations stand out with unparalleled accuracy and durability. Prima, trading since 2014 are one of Europe's largest resellers and distributors of 3D Printers and associated products. If the removal is problematic, the part with the base can be placed in a fridge and the piece will be released only with a light touch. Finance is only available to permanent UK residents aged 18+, subject to status, terms and conditions apply. All users who prefer use lacquer and not Kapton Tape, can be achieved with a sprayed or vaporized light on the glass bed base that the first plastic layer is fixed completely to this base bed.