Posted 20 hours ago

LSC 13105589 : GENUINE Clutch Pipe Elbow Connector (Manual Only) - NEW from LSC

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Extruded Teflon tube with stainless steel single wire braid cover (1/8" bore) commonly used for braking systems. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . I really just wanted to give Lloyds a kit of parts for the upcoming clutch and gearbox mods including the braided hose, but I guess they can source it.

When I did my clutch I dropped the seal and didnt realise that there was supposed to be a seal there! Please also ensure that you have the necessary tools, knowledge and experience before working on fuel, brake and clutch and systems. Use copper grease on the fitting to coat the stainless spring fingers and it might come apart next time, but don't hold your breath.Infact if the clutch pipe is off its only a few minutes job to remove the bulkhead adapter itself and take that as well. Extruded Teflon tube with stainless steel single wire braid cover and clear PVC outer protective cover - cover must be cut back to take fittings.

Bearing in mind the master and slave cylinders seem absolutely fine, it's just the coupling that's damaged I'm thinking of just cutting the pipes (I think they afre 8mm? All our clutch fluid pipes are from trusted brands in the motoring industry, so you can count on them to be reliable and of excellent quality. Could anyone confirm or advise if this will work, or does the original connector serve any other purpose? After 2009 the pipe has a swage collar 10-15 mm along its length either end and the nylon locking plug is split into 4 for about half its length and is a clip fit on the pipe this part number plug is 215615B I may have to see if the later pipe is available of go to a hydraulic hose company and have one made. We also have a massive range of lubrication spares, crankshaft drive spares, and timing control parts.IMPORTANT NOTE: Kindly Be Aware That This Part May Fit Some Other Vehicles Make/Models/Engine Types, Please Refer To Compatibility For Further Information As Variants Are Common In Vehicles And Compatibility Is For Guidance Purpose Only.

I belive the union on the inner wing is Imperial and the brake pipe connectors at the wishbones are metric. Come join the discussion about performance, reviews, reliability, modifications, troubleshooting, maintenance, for all models. No problem mate and thanks for all your help so far, ordinarily I'd just whip the pipe off but the car is used too regularly to have it laid up. Additionally, if it is a simple coupling does anyone know what sort of pressure the system operates at, so that I can get the correct part? Extruded Teflon tube with stainless steel single wire braid cover (3/16" bore) commonly used for clutch systems.I don’t know whether the hydraulic fluid in the lines is stopping me pushing it shut or if it’s something else. AN specification refers to ‘dash’ sizes, arrived at by multiplying the nominal bore of the hose by 16, hence ½” hose is -8.

I took the slave cylinder and bulkhead adapter with me and just asked my local hydraulics place to make the hose accordingly. I knew I should have left the old lines in place and just changed the cylinders (that’s a joke by the way!Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. Ah, yes requires "some force" to push all those metal fingers back can't quite remember think I jammed the big part against the car(Not plastic clip?

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment