Ronseal DS25L30M Decking Stripper 2.5 Litre, 2.5L

Product Information

The Predator Jet PU Work Gloves are lined with a 13 gauge seamless Polyester liner and have a Polyurethane palm coating. When the finish is coming off, use a high-pressure washer with a max of 2700 PSI and work in the direction of the timber grain. For a more effective process, use a high-pressure washer with an attached turbo nozzle. Because of the nature of Owatrol products, you will not need to strip the coating off year after year, but instead you will simply need to give the wood a clean and then give it a few touch ups in the effected areas – perhaps only once a year.

Leave it to work for around 30 minutes, keeping an eye out for any patches that start to dry out. If this happens, re-apply on these areas.If Tropitech is the chosen finish, lighten wood with a 1 part bleach to 3 parts water solution. Restrictions Where your measurement falls on the boundary of two sizes, we recommend selecting the larger of the two sizes for a comfortable fit. Again I’d go down the apply neat and pressure washer route myself. Be careful though, bleaching your boards is quite possible though when that happened to mine the wood oil brought them up beautifully again. Pros:

Using weed control fabric significantly reduces the need for chemical weed killers while being safe to use and very easy to install. After rinsing ALWAYS neutralise surface with Net-trol except where Tropitech is the chosen finish (see “After stripping/cleaning”). Do not use a wire brush to scrub the surface. Need to be careful when applying as you can fade your boards (only temporary until stain applied though) Start spraying or rolling the stripper along edges first and then fill up the entire remaining area, During application, make sure to keep the applied surface wet with a garden hose water mist or spray. While you may be certain you’ve chosen the right product for the job, it’s always a good idea to perform a small patch test on the surface or object, ensuring that the chosen stripper will not damage or discolour your surface.There are two broad categories of paint stripper: solvent-based and caustic-based. The one you’ll need to use is dependent on the material of the surface you’re applying it to, the condition of the surface and what type of paint is being removed.