LemonBest Car Wash Foam Gun, Snow Foam Gun for Hose Pipe, Car Cleaning Connect to Garden Hose Snow Foam Lance, Washing Gun Water Soap Shampoo Sprayer 900ml Easy Assembly

Product Information

While the decisive factor in whether or not a foam gun will perform well is mainly the water pressure, there are definitely guns that are better than the rest. All the dirt that’s stuck on the paintwork acts like sandpaper and scratches away at the clear coat, leaving marks behind.

Snow foam for hose pipe - Styling and Car Care - BRISKODA Snow foam for hose pipe - Styling and Car Care - BRISKODA

The mixture of these ingredients creates a thick foam which clings to your car’s bodywork for maximum cleaning power. Put the lid or connector on the top of your foam cannon bottle and gently stir the product round and round.I've used the Demon Snow Foam as supplied with attachment via a hose and it's ok albeit as Lee01 said its a bit watery. It also lubricates the surface more than usual for when you come to remove the dirt with a wash mitt. There’s an embossed scale on the bottle, but both it and the neck are narrow, making it hard to fill, and it toppled easily. They definitely focused on build quality while making this product as they also offer an adjustable spray end nozzle which changes the spray fan.

Snow Foaming Your Car | DriveDetailed The Complete Guide To Snow Foaming Your Car | DriveDetailed

The views expressed herein are those of the individual contributors and not necessarily those of BRISKODA or SKODA. No, you don’t need a pressure washer to apply snow foam; although it may produce better results with one. Snow foam (along with correct washing techniques is your best defence against inflicting swirls and scratches in your car’s finish. This method mimics the use of a pressure washer with a snow foam gun, only with slightly less pressure. The brass connector ensures the tightness of the attachment to the hose pipe to try and maximise the pressure.The ergonomic design makes them comfortable to use and their adjustable pressure knob allows you to fine-tune the amount of foam produced. Helping you to achieve a level of suds that you couldn’t get with a bucket and sponge, increasing lubricity and minimizing scratches. The alternative to snow foam for me is a pump action sprayer with a citrus based cleaner or even low dilution snow foam chem, coat the car and rinse, keep the dilution such so that it is not too strong so it wont attack rubbers etc and wet enough that it wont dry out too quickly. This will help with the next time you snow foam your car as dirt and debris will rinse off easier from paintwork which has existing protection applied. If the product is adding extra pH to the mix, then you should look for one that can keep a nice balance.

Snow Foam a Car Without a Pressure - Auto Adviser Can You Snow Foam a Car Without a Pressure - Auto Adviser

Whether you like it or not, some car wash foam guns are not compatible with garden hoses – meaning that you will have to get a special hose for that.Generally speaking, most foam cannons will work with any pressure washer that has a minimum of 1,000 PSI and up to 3,500 PSI. Unlike any other foam gun, this comes with a filter that will keep any particles from entering the gun, helping to minimize potential scratching. However, if you use a foam gun, the unit will only draw as much soap as it needs and mix it with the water – foaming things up nicely.