Scola EV CM1K Moulding/Casting Powder 1kg

Product Information

An off-white plaster of Paris (quarried and finished in England) suitable for fibrous plasterwork, decorative cornices, ceiling roses, and general casting applications. Over the past two and a half years I have been using Tilgear for purchasing the tool kits for the Lee Marley Brickwork apprentices. Simply mix the advised ratio of powder-to-water in a bowl until you have smooth mixture, ready for pouring into a greased mould. The Parting Powde r can be used with both oil bonded sands (such as Petrobond and Delft Clay) and water bonded sands (such as Bromesgrove Green Sand. The dust bag is made from finely woven material and has built in draw string to keep the parting powder in, measuring 205mm x 140mm.

Mix with water, then submerge hand or foot into the mixture, wait 60 seconds for Alginate to set and remove. Once dry, remove the stone by pressing it out from the back very carefully with a tool that that won't damage the stone, or use a wax stick to lift the stone from the front. We're not talking a troupe of highly-strung Hollywood types - we're talking miniatures and chess sets - that sort of thing! cards) thick for a pressed in bezel), or set the bezel on top of the clay and add a rope of syringe or clay around the bezel to keep it in place.Pro-HT is a high technology phosphate bonded product designed for casting high temperature alloys such as Platinum and Steel with metal pouring temperatures up to 2100 c / 3800 F. Your expertise at Tilgear is something I value greatly, especially when it comes to selecting the right tools and equipment for our school's needs. Pro-HT has a high refractory content and fine particle size distribution, this produces high fired mould strength with precise detail replication of the wax pattern under the harsh casting conditions these alloys demand. To create a placeholder for a bezel set stone, create a traditional bezel ( using bezel wire) for your chosen stone.

Delivered Direct From Our Supplier Tooltip This product is delivered to you directly from our supplier.Pro-HT is packaged in aluminium foil bags to achieve a long lasting, consistent and high quality powder. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.